"""Signal-to-Noise Ratio
===============================

Imagine developing a song recognition application. The software's goal is to recognize a song even when it's played in a noisy environment, similar to Shazam. To achieve this, you want to enhance the audio quality by reducing the noise and evaluating the improvement using the Signal-to-Noise Ratio (SNR).

In this example, we will demonstrate how to generate a clean signal, add varying levels of noise to simulate the noisy recording, use FFT for noise reduction, and then evaluate the quality of the reconstructed audio using SNR.
"""

# %%
# Import necessary libraries

import matplotlib.animation as animation
import matplotlib.pyplot as plt
import numpy as np
import torch

from torchmetrics.audio import SignalNoiseRatio

# %%
# Generate a clean signal (simulating a high-quality recording)


def generate_clean_signal(length: int = 1000) -> tuple[np.ndarray, np.ndarray]:
    """Generate a clean signal (sine wave)"""
    t = np.linspace(0, 1, length)
    signal = np.sin(2 * np.pi * 10 * t)  # 10 Hz sine wave, representing the clean recording
    return t, signal


# %%
# Add Gaussian noise to the signal to simulate the noisy environment


def add_noise(signal: np.ndarray, noise_level: float = 0.5) -> np.ndarray:
    """Add Gaussian noise to the signal."""
    noise = noise_level * np.random.randn(signal.shape[0])
    return signal + noise


# %%
# Apply FFT to filter out the noise


def fft_denoise(noisy_signal: np.ndarray, threshold: float) -> np.ndarray:
    """Denoise the signal using FFT."""
    freq_domain = np.fft.fft(noisy_signal)  # Filter frequencies using FFT
    magnitude = np.abs(freq_domain)
    filtered_freq_domain = freq_domain * (magnitude > threshold)
    return np.fft.ifft(filtered_freq_domain).real  # Perform inverse FFT to reconstruct the signal


# %%
# Generate and plot clean, noisy, and denoised signals to visualize the reconstruction

length = 1000
t, clean_signal = generate_clean_signal(length)
noisy_signal = add_noise(clean_signal, noise_level=0.5)
denoised_signal = fft_denoise(noisy_signal, threshold=10)

plt.figure(figsize=(12, 4))
plt.plot(t, noisy_signal, label="Noisy environment", color="blue", alpha=0.7)
plt.plot(t, denoised_signal, label="Denoised signal", color="green", alpha=0.7)
plt.plot(t, clean_signal, label="Clean song", color="red", linewidth=3)
plt.xlabel("Time")
plt.ylabel("Amplitude")
plt.title("Clean Song vs. Noisy Environment vs. Denoised Signal")
plt.legend()
plt.show()

# %%
# Convert the signals to PyTorch tensors and calculate the SNR
clean_signal_tensor = torch.tensor(clean_signal).float()
noisy_signal_tensor = torch.tensor(noisy_signal).float()
denoised_signal_tensor = torch.tensor(denoised_signal).float()

snr = SignalNoiseRatio()
initial_snr = snr(preds=noisy_signal_tensor, target=clean_signal_tensor)
reconstructed_snr = snr(preds=denoised_signal_tensor, target=clean_signal_tensor)
print(f"Initial SNR: {initial_snr:.2f}")
print(f"Reconstructed SNR: {reconstructed_snr:.2f}")

# %%
# To show the effect of different noise levels on the SNR, we create an animation that iterates over different noise levels and updates the plot accordingly:
fig, ax = plt.subplots(figsize=(12, 4))
noise_levels = [0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9]


def update(num: int) -> tuple:
    """Update the plot for each frame."""
    t, clean_signal = generate_clean_signal(length)
    noisy_signal = add_noise(clean_signal, noise_level=noise_levels[num])
    denoised_signal = fft_denoise(noisy_signal, threshold=10)

    clean_signal_tensor = torch.tensor(clean_signal).float()
    noisy_signal_tensor = torch.tensor(noisy_signal).float()
    denoised_signal_tensor = torch.tensor(denoised_signal).float()
    initial_snr = snr(preds=noisy_signal_tensor, target=clean_signal_tensor)
    reconstructed_snr = snr(preds=denoised_signal_tensor, target=clean_signal_tensor)

    ax.clear()
    (noisy,) = plt.plot(t, noisy_signal, label="Noisy Environment", color="blue", alpha=0.7)
    (denoised,) = plt.plot(t, denoised_signal, label="Denoised Signal", color="green", alpha=0.7)
    (clean,) = plt.plot(t, clean_signal, label="Clean Song", color="red", linewidth=3)
    ax.set_xlabel("Time")
    ax.set_ylabel("Amplitude")
    ax.set_title(
        f"Initial SNR: {initial_snr:.2f} - Reconstructed SNR: {reconstructed_snr:.2f} - Noise level: {noise_levels[num]}"
    )
    ax.legend(loc="upper right")
    ax.set_ylim(-3, 3)
    return noisy, denoised, clean


ani = animation.FuncAnimation(fig, update, frames=len(noise_levels), interval=1000)